The Ugly Real Truth Of Saab 93 Key Fob

How to Replace a Saab 9-3 Key





The Saab 9-3 has a good attraction for drivers. It offers good visibility and an impressive performance engine. It also has a high safety rating.

It is important that you have two keys that work for your vehicle. It could be costly to replace a key if you lose it.

How to Replace the Ignition Key in the Saab9-3

If your car's keys won't turn in the ignition it is time to replace it. This guide will guide you through the steps to do it on a Saab 9-3. You'll need a new key with a reprogrammable battery, and a new key-fob cover.

As opposed to earlier models, modern Saab cars have transponders in the key-fob rather than a physical key to unlock and start the vehicle. The rechargeable batteries contained in the key-fob will eventually get worn out, and eventually aren't able to hold any charge. This is especially when you keep using the same key in the same lock.

new saab key is that the battery can be replaced fairly easily by an experienced locksmith. If you've got the right tools, and a little patience, you can do it yourself. The first step is taking the key-fob apart. Insert a flathead into the slot in the middle of your case. You must take your time, as the plastic is very thin and easily damaged.

After the case has been opened, you can prepare the new key by combining the lower half of the previous key with the transponder and banana on the new key. This will ensure the new key is properly connected to your CIM, which can make a big difference when replacing the sole key of your Saab 9-3.

How do I replace the ignition Key in a Saab 900

Unless you have two keys, you will have to take off the dashboard and steering wheel in order to access the ignition. Start by disconnecting your negative battery cable. After the battery has been removed, you can remove all the trim pieces and dashboard pieces that surround the steering wheel. After the dashboard is removed, you can push an screwdriver through the hole in the back of the ignition switch and remove it.

The ignition cylinder is equipped with the key lock, which can prevent the vehicle from starting if the key isn't present in the. If the ignition switch on your 900 doesn't work properly, you should check whether the key is inside the lock or is stuck inside the ignition barrel. It is also recommended to rotate your keys and keep them clean to avoid bending.

Saab cars differ from other cars in that they do not use traditional metal keys. Instead, the car is able to recognize electric signals from the key fob through the use of a special microchip.

If you only lose one working key fob your dealer will charge an additional fee to replace your computer module (also called the CIM). However, we can reprogram the computer's EEPROM, and then prepare it to accept new keys without replacing it. This will save you up to 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Find out more about it here!

How to replace the ignition Key in a Saab9-5

The metal part of the classic Saab keys is simple to duplicate and doesn't present a major threat to vehicle theft. The electronic portion of the key-fob is equipped with an electronic chip that detects the car when the key is inserted in the ignition switch.

Saab's anti-theft system has relied on this technology for more than 10 years. It's not quite as effective as a physical door lock however, it makes the theft of your car much more difficult. That's why every Saab owner should keep an extra key in their possession.

The majority of new Saabs are delivered with two keys, but they can be added by an agent using a handheld device referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is NG 9-3 vehicles, which are more modern and more advanced features that require the use of a key-fob.

If you lose all keys, the dealer will replace your CIM or TWICE modules and bill you a premium for it. However, we can reprogram your EEPROM on your computer to accept new keys, without having to replace the expensive modules.

How do I replace the ignition Key on an XC90 Saab

It's possible to replace your SAAB key fob if it is experiencing issues turning the lock barrel. It's a simple process and you don't need to visit a dealer. You can do it at home with just a few simple tools.

In the beginning, you'll need to prepare the new key. Before you begin, ensure that the anti-theft feature is disabled by placing blocks on the rear wheels and engaging the handbrake. Then, you can put the key in the ignition and move it to the on position which activates the accessories, but it doesn't start the engine. Repeat this procedure five times and leave the key in the on position.

You'll then need to purchase an additional case for your key fob. They can be found at a variety of auto parts stores and are typically inexpensive. Based on the model, you can even get them without any electronic components.

To open up the case, put an flathead screwdriver into the slot that is in the middle, and gently work it. The case will break easily and, once you've got it open, you'll get access to the internal electronics. Use a flathead screwdriver to gently pull out the electronics.